Jet Dust Filter

Jet Dust Filter 1.compact structure 2.flexible process, arrangement 3.small land occupying area 4.big filtering area

Principle:

-  Jet Dust Filter has a round body which comprises of by three parts: top air tank, middle body and bottom part. Filters are fixed on the top part and hung in the middle part. The dusty air is aspirated into Jet Dust Filter tan gently from the inlet which is normal on the middle body. The air goes through the filter cloth while most of the dust adheres to the outside of filters. Pumping air puffs the filters and adhered dust is shaken away from the filters. Dust falls down to the bottom and then is collected and discharged from the bottom. The clean air goes out from the air outlet which is equipped on the top part.

Features:

- Advanced design and excellent fabricating.

- Tangent air inlet design can separate bigger dust particles, reduce the load of the filters.

- High efficiency, particle < 1 um, efficiency > 95%.

- With solenoid valve controller and digital control meter, easy initializing the pumping length and interval. 2 or 3 filters are controlled together as one unit.

- The rising air pressure: 0.4~0.5MPa, normally using air compressor.

Application:

- Jet Dust Filter is widely applied in flour mills aspiration system and pneumatic transferring system for separating the dust or material from the cleaned air.

-  Jet Dust Filter Can also be used in the blowing line as a discharge equipment.

-  Jet Dust Filter is widely applied in feed mills, rice mills and other grain processing plant mills for the same use

Jet Dust Filter